OEM Harley Ignition Spark Plug Wire Cable NOS Buell EVO Thunderbolt 31995-83
Part #: 31995-83
Harley-Davidson part number 31995-83 is an ignition spark plug wire.
- Type: 7mm High-Tension (HT) Spark Plug Cable.
- Length: Approximately 18 inches (standard for front or rear cylinder applications on specific tube-frame models).
-
Terminations:
- Spark Plug End: 90-degree rubber boot.
- Coil End: Straight or slightly angled rubber boot (depending on the production year).
- Core Material: Suppressor core (designed to reduce Radio Frequency Interference/RFI for electronic ignitions).
- Outer Jacket: Black silicone or EPDM rubber for heat and chemical resistance.
Fitment: Part number 31995-83 is the Front Ignition Spark Plug Wire (18-inch) specifically for carbureted tube-frame Buell motorcycles with the Evolution-style engine.
It is used as a factory-standard component for the following models:
- Buell S1 Lightning: 1996–1998
- Buell S2 Thunderbolt: 1994–1996
- Buell S3/S3T Thunderbolt: 1997–2002
- Buell M2 Cyclone: 1997–2002
- Buell X1 Lightning: (Select 1999–2002 models, though most X1s used a different set due to fuel injection).
Specific Placement:
- Position: This is the Front Cylinder wire.
- Engine Type: 1203cc air-cooled 45-degree V-Twin.
- Installation Note: This wire is designed to reach from the ignition coil (typically mounted on the left side/motor mount area) to the front spark plug.
Please make sure of fitment before buying.
NOS, did not open for pictures.
Selling as pictured, save on shipping by coming to store in Butler, PA
032026 CC