OEM Harley Davidson Front Stainless Steel Braided Brake Line Softail 46011-01

OEM Harley Davidson Front Stainless Steel Braided Brake Line Softail 46011-01

  • Sale
  • $49.99
Shipping calculated at checkout.

OEM Harley Davidson Front Stainless Steel Braided Brake Line Softail 46011-01

Part #: 46011-01

Harley-Davidson part number 46011-01 refers to a Front Stainless Steel Braided Brake Line Kit designed for specific Softail models. 

It is a standard-length, high-performance replacement for the stock front brake hose.

  • Inner Liner: Features a PTFE (Teflon) protective inner liner for smooth fluid transfer and minimal expansion under pressure.
  • Reinforcement: Constructed with an aeronautical-grade stainless steel outer braid.
  • Outer Coating: Finished with a clear protective armor coat (or black vinyl in some aftermarket versions) to prevent the braid from scratching motorcycle paint and to resist environmental corrosion.
  • Fittings: Equipped with chrome-plated steel fittings.

Fitting Specs:

  • Master Cylinder Banjo: Typically a 7/16-inch or 10mm fitting with a specific angle (often 30–35 degrees) to clear the handlebar controls.
  • Caliper Banjo: Usually a 3/8-inch (10mm) 90-degree banjo fitting.
  • Compliance: Meets or exceeds DOT MVSS-106 specifications, making it 50-state legal for street use.

Operating Limits:

  • Operating Pressure: Up to 4,206 PSI (290 BAR).
  • Burst Pressure: Approximately 12,618 PSI (870 BAR).
  • Temperature Range: -70°C (-94°F) to 250°C (482°F).

Fitment: This part is an exact fit for the following models within the 2000–2007 year range:

  • FLSTC / FLSTCI (Heritage Softail Classic): 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007.
  • FLSTF / FLSTFI (Fat Boy): 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007.
  • FLST / FLSTI (Heritage Softail): 2006 only.

Fitment Limitations & Exclusions:

  • Brake System: Designed exclusively for single-disc front brakes. It will not fit models with dual front discs without additional hardware.
  • ABS: This part is for non-ABS models only.
  • Voltage Regulator: Harley-Davidson specifies fitment for models without chrome voltage regulator louvers.
  • Handlebars: This is a stock-length line (approx. 44-1/4 inches). It is not compatible with tall "ape hanger" bars or significant riser extensions.

Installation Hardware:

  • Top Fitting: 7/16" (11mm) banjo.
  • Bottom Fitting: 3/8" (10mm) 90-degree banjo.
  • Necessary Extras: Installation requires new crush washers (gaskets) to ensure a leak-proof seal at the master cylinder and caliper.

Please make sure of fitment before buying.

New.

Selling as pictured, save on shipping by coming to store in Butler, PA

022426 CC